Modeling and optimization study by response surface methodology on magnesium ions removal from hard water through a biosorbent

Aghav R.M., Kumar S., Mukherjee S.N., Artificial neural network modeling of phenol and resorcinol from water environment using some carbonaceous adsorbents, Journal of Hazardous Material 188 (2011) 67-77.
Aksu Z., and Akpinar D., Competitive biosorption of phenol and chromium (VI) from binary mixtures onto dried anaerobic activated sludge, Biochemical Engineering Journal 7 (2001) 183-193.
Al-Senani G.M., and Al-Fawzan F.F., Adsorption study of heavy metal ions from aqueous solution by nanoparticle of wild herbs, Egyptian Journal of Aquatic Research 44 (2018) 187-94.
Babel S., and Kurniawan T.A., Cr (VI) removal from synthetic wastewater using coconut shell charcoal and commercial activated carbon modified with oxidizing agents and/or chitosan, Chemosphere 54 (2004) 951-967.
Banat FA., Albashir B., Alasheh S., Hayajneh O., Adsorption of phenol by bentonite, Environmental Pollution 107 (2000) 391-398.
Bingol D, Hercan M, Elevli S., Kilic E., Comparison of the results of response surface methodology and artificial neural network for the biosorption of lead using black cumin, Bioresource Technology 112 (2012) 111-115.
Cardoso V.D.A., Souza AGD., Sartoratto P.P.C., Nunes L.M., The ionic exchange of cobalt, nickel and copper (II) in alkaline and acid-layered titanates, Colloids and Surfaces A: Physicochemical and Engineering Aspects 248 (2004) 145-149.
Castro L., Blazquez M.L., Gonzalez F., Munoz J.A., Balester A., Heavy metal adsorption using biogenic iron compounds, Hydrometalurgy 179 (2018) 44-51.
Cimino G., Passerini A., Toscano G., Removal of toxic cations and Cr (VI) from aqueous solution by hazelnut shell, Water Research 34 (2000) 2955-2962.
Desai K.M., Survase S.A., Survase PS., Saudagar P.S., LeLe S.S., Singhal R.S., Comparison of artificial neural network (ANN) and response surface methodology (RSM) in fermentation media optimization: case study of fermentative production of scleroglucan, Biochemical Engineering Journal 41(2008) 266-273.
Eccles H., Treatment of metal-contaminated wastes: why select a biological process? Trends Biotechnololgy 17(1999) 462-465.
Esalah J.O., Weber M.E., Vera J.H., Removal of lead, cadmium and zinc from aqueous solutions by precipitation with sodium Di-(n-Octyl) phosphinate, Canadian Journal of Chemical Engineering 78 (2000) 948-954.
Ferreira L.S., Rodrigues M.S., Carvalho J.C.M.D., Lodi A., Finocchio E., Perego P., et al. Adsorption of Ni+2, Zn+2 and Pb+2 onto dry biomass of Arthrospira (Spirulina) platensis and Chlorella vulgaris, I. single metal systems, Chemical Engineering Journal 173 (2011) 326-333.
Freundlich H.M.F., Over the adsorption in solution, Journal of Physical Chemistry 57 (1906) 385–471.
Geyikci F., Kilic E., Coruh S., Elevli S., Modeling of lead adsorption from industrial sludge leachate on red mud by using RSM and ANN, Chemical Engineering Journal 183 (2012) 53-59.
Harington J., The desirability function, India Quality Control, 21 (1965) 494-498.
Hasan S.H., Srivastava P., Talat M., Biosorption of Pb (II) from water using biomass of aeromonas hydrophila: central composite design for optimization of process variables, Journal of Hazardous Material 168 (2009) 1155-1162.
Hong M., Yu L.Y., Wang Y., Zhang J., Chen Z., Dong L., Zan Q., Li R., Heavy metal adsorption with zeolites: the role of hierarchical pore architecture, Chemical Engineering Journal 359 (2019) 363-372.
Inspectorate D.W., Water hardness, Northern Ireland Environment Agency, 1999.
Kasiri M.B., Aleboyeh H., Aleboyeh A., Heterogeneous photo-fenton process with response surface methodology and artificial neural networks, Environmental Science and Technology 42 (2008) 7970-7975.
Khayet M., Cojocaru C., Essalhi M., Artificial neural network modeling and response surface methodology of desalination by reverse osmosis, Journal of Membrane Science 368 (2011) 202-214.
Kumar N.S., Subbaiah M.V., Reddy A.S., Krishnaiah A., Biosorption of phenolic compounds from aqueous solutions onto chitosanabrus precatorius blended beads, Journal of Chemical Technology and Biotechnology 84 (2009) 972-981.
Kyzas G.Z., Bomis G., Kosheleva R.I., Efthimiadou E.K., Favvas E.P., Kostoglou M., Mitropoulos A.C., Nanobubbles effect on heavy metal ions adsorption by activated carbon, Chemical Engineering Journal 356 (2019) 91-97.
Langmuir I., The constitution and fundamental properties of solids and liquids. Part I. solids, Journal of the American Chemical Society 38 (1916) 2221–2295.
Low K.S., Lee C.K., Leo A.C., Removal of metals from electroplating wastes using banana pith, Bioresource Technology 51(1995) 227-31.
Marshal W.E., and Johns M.M., Agricultural by-products as metal adsorbents: sorption properties and resistance to mechanical abrasion, Journal of Chemical Technology and Biotechnology 66 (1996) 192-198.
Mohammadidoust A., Rahimi M., Feyzi M., Effects of solvent addition and ultrasound waves on viscosity reduction of residue fuel oil, Chemical Engineering and Processing: Process Intensification 95 (2015) 353-361.
Mohammadidoust A., Rahimi M., Feyzi M., An optimization study by response surface methodology (RSM) on viscosity reduction of residue fuel oil exposed ultrasonic waves and solvent injection, Iranian Journal of Chemical Engineering 13 (2016a) 3-19.
Mohammadidoust A., Rahimi M., Feyzi M., Prediction and optimization of the effects of combining ultrasonic waves and solvent on the viscosity of residue fuel oil by ANN and ANFIS, Physical Chemistry Research 4 (2016b) 333-53.
Monser L., and Adhoum N., Modified activated carbon for the removal of copper, zinc, chromium and cyanide from wastewater, Separation and Purification Technology 26 (2002) 137-146.
Montgomery D.C., Design and analysis of experiments, seventh ed. John Wiley&Sons, NewYork, 2008.
Ni B.J., Huang Q.S., Wang C., Ni T.Y., Sun J., Wei W., Competitive adsorption of heavy metals in aqueous solution onto biochar derived from anaerobicaly digested sluge, Chemosphere 219 (2019) 351-357.
Ngah W.S.W., and Hanafiah M.A.K.M., Removal of heavy metal ions from wastewater by chemically modified plant wastes as adsorbents: a review, Bioresource Technology 99 (2008) 3935-3948.
Ogata F., Ueta E., Kawasaki N., Characteristics of a novel adsorbent Fe-Mg-type hydrotalcite and its adsorption capability of As (III) and Cr (VI) from aqueous solution, Journal of Industrial and Engineering Chemistry 59 (2018) 56-63.
Pamukoglu M.Y., Kargi F., Removal of copper (II) ions from aqueous medium by biosorption onto powdered waste sluge, Process Biochemistry 41 (2006) 1047-1054.
Pavan F.A., Mazzocato A.C., Jacques R.A., Dias S.L.P., Ponkan peel: a potential biosorbent for removal of Pb (II) ions from aqueous solution, Biochemical Engineering Journal 40 (2008) 357-362.
Pedersen A.J., Characterization and electrolytic treatment of wood combustion fly ash for the removal of cadmium, Biomass & Bioenergy 25 (2003) 447-458.
Prakash N., Manikandan S.A., Govindarajan L., Vijayagopal V., Prediction of biosorption efficiency for the removal of copper (II) using artificial neural networks, Journal of Hazardous Materials 152 (2008) 1268-1275.

Preetha B., and Viruthagiri T., Application of response surface methodology for the biosorption of copper using rhizopus arrhizus, Journal of Hazardous Materials 143 (2007) 506-510.
Ranjan D., Mishra D., Hasan S.H., Bioadsorption of arsenic: an artificial neural networks and response surface methodology approach, Industrial and Engineering Chemistry Research 50 (2011) 9852-9863.
Rostami K., Joodaki M.R., Some studies of cadmium adsorption using aspergillus niger, penicillium austurianum, employing an airlift fermenter, Chemical Engineering Journal 89 (2002) 239-252.
Saber S., Amani-Ghadim A.R., Mirzajani V., Removal of Cr (II) from polluted solutions by electrocoagulation: modeling of experimental results using artificial neural network, Journal of Hazardous Material 171 (2009) 484-490.
Shihani N., Kumbhar B.K., Kulshreshtha M., Modeling of extrusion process using response surface methodology and artificial neural networks, Journal of Engineering Science and Technology 1 (2006) 31-40.
Shojaeimehr T., Rahimpour F., Khadivi M.A., Sadeghi M., A modeling study by response surface methodology (RSM) and artificial neural network (ANN) on Cu2+ adsorption optimization using light expended clay aggregate (LECA), Journal of Industrial and Engineering Chemistry 20 (2014) 870-880.
Singh K.P., Gupta S., Singh A.K., Sinha S., Experimental design and response surface methodology for optimization of Rhodamine B removal from water by magnetic nanocomposite, Chemical Engineering Journal 165 (2010) 151-160.
Sud D., Mahajan G., Kaur M.P., Agricultural waste material as potential adsorbent for sequestering heavy metal ions from aqueous solutions: A review, Bioresource Technology 99 (2008) 6017-6027.
Tchobanoglous G., and Burton F.L., Wastewater engineering: Treatment and reuse, Metcalf & Eddy, Inc., 4th ed. McGraw-Hill. New York; 2003.
Turan N.G., Mesci B., Ozgonenel O., Artificial neural network (ANN) approach for modeling Zn (II) adsorption from leachate using a new biosorbent, Chemical Engineering Journal 173 (2011) 98-105.
Tyusenkov A.S., and Cherepashkin S.E., Scale inhibitor for boiler water systems, Russian Journal of Applied Chemistry 87 (2014) 1240-1245.
Wu Y., Qiu X., Cao S., Chen J., Shi X., Du Y., Deng H., Adsorption of natural composite sandwich-like nanofibrous mats for heavy metals in aquatic environment, Journal of Colloid and Interface Science 539 (2019) 533-544.
Xu D., Tan X., Chen C., Wang X., Removal of Pb (II) from aqueous solution by oxidized multiwaled carbon nanotubes, Journal of Hazardous Materials 154 (2008) 407-416.
Zhang Z., Li M., Chen W., Zhu S., Liu N., Zhu L., Immobilization of lead and cadmium from aqueous solution and contaminated sediment using nano-hydroxyapatite, Environmental Pollution 158 (2010) 514-519.