Heterogeneous catalytic oxidation of ciprofloxacin over CuFe/Al₂O₃: Multi-variable optimization by Box Behnken design and kinetic interpretation

Abimanyu, H. et al. (2008) ‘Preparation and characterization of Fe/Cu/Al2O3-composite granules for SO3 decomposition to assist hydrogen production’, Applied Catalysis A: General, 343(1-2), pp. 134-141. doi: https://doi.org/10.1016/j.apcata.2008.03.033
Adnan, R. et al. (2021) ‘CuFe2O4 as a heterogeneous Fenton catalyst for the removal of ciprofloxacin from aqueous solution at natural pH’, Malaysian Journal of Catalysis, 5(1), pp. 31-37. doi: https://doi.org/10.11113/mjcat.v5n1.159.
Ahmed, Y. et al. (2025) ‘Advancements and challenges in Fenton-based advanced oxidation processes for antibiotic removal in wastewater:From the laboratory to practical applications’, Journal of Environmental Chemical Engineering, 13(1), p 115068. doi: https://doi.org/10.1016/j.jece.2024.115068
Al-Abadleh, H.A. and Grassian, V.H. (2003) ‘FT-IR study of water adsorption on aluminum oxide surfaces’, Langmuir, 19(2), pp.341-347.doi: https://doi.org/10.1021/la026208a
Assassi, M, Danane, F. and Madjene, F. (2023) ‘Box-Behnken experimental design method applied to optimize Photo-Fenton degradation of pharmaceutical atorvastatin calcium in aqueous solution’, Iranian Journal of Chemistry and Chemical Engineering, 42(11), pp. 3665-3675. doi: https://doi.org/10.30492/ijcce.2023.559326.5487
Brillas, E. (2023) ‘Progress of antibiotics removal from synthetic and real waters and wastewaters by persulfate-based advanced oxidation processes’, Journal of Environmental Chemical Engineering, 11(6), p. 111303. doi: https://doi.org/10.1016/j.jece.2023.111303
Buenaño, L. et al. (2024) ‘Optimization by Box–Behnken design for environmental contaminants removal using magnetic nanocomposite’, Scientific Reports, 14(1), p. 6950. doi: https://doi.org/10.1038/s41598-024-57616-8
Chaker, H. et al. (2021) ’Modeling and Box Behnken design optimization of photocatalytic parameters for efficient removal of dye by lanthanum-doped mesoporous TiO2’, Journal of Environmental Chemical Engineering, 9(1), p.104584. doi: https://doi.org/10.1016/j.jece.2020.104584
Chen, M. et al. (2020) ‘Preparation of Cu-MOFs and its corrosion inhibition effect for carbon steel in hydrochloric acid solution’, Journal of Molecular Liquids, 318, p. 14328. doi: https://doi.org/10.1016/j.molliq.2020.114328
Dindaþ, G.B. et al. (2024) ‘Development of Fe/HNT and Fe/HNT-Al2O3 composite catalysts and application in successive treatment processes for pharmaceutical industry wastewater’, Journal of Environmental Chemical Engineering, 12(3), p.112820.doi: https://doi.org/10.1016/j.jece.2024.112820
El Salam, H.A. and El-Fawal, E.M. (2024) ‘Optimized photocatalytic degradation of antibiotics with modified Co-MOF and NiCo-MOF catalysts’, Environmental Processes, 11(3), p. 40. doi: https://doi.org/10.1007/s40710-024-00718-2
Faungnawakij, K. et al. (2009) ‘Crystal structure and surface species of CuFe2O4 spinel catalysts in steam reforming of dimethyl ether’, Applied Catalysis B. Environmental, 92(3-4), pp.341-350. doi: https://doi.org/10.1016/j.apcatb.2009.08.013
Franco, A. et al. (2017) ‘Nanostructured porous materials: synthesis and catalytic applications’, Nanotechnology in Catalysis: Applications in the Chemical Industry Energy Development, and Environment Protection, pp. 119-144. doi: https://doi.org/10.1002/9783527699827.ch6
Gao, B. et al. (2018) ‘Catalytic performance and reproducibility of Ni/Al2O3 and Co/Al2O3 mesoporous aerogel catalysts for methane decomposition’, Industrial & Engineering Chemistry Research, 58(2), pp. 798-807. doi: https://doi.org/10.1021/acs.iecr.8b04223
Garrido-Cardenas, J.A. et al. (2020) ‘Wastewater treatment by advanced oxidation process and their worldwide research trends’ International journal of environmental research and public health, 17(1), p. 170. doi: https://doi.org/10.3390/ijerph17010170
Giri, A.S. and Golder, A.K. (2014) ‘Ciprofloxacin degradation from aqueous solution by Fenton oxidation: reaction kinetics and degradation mechanisms’, Rsc Advances, 4(13), pp. 6738-6745. doi: https://doi.org/10.1039/C3RA45709E
Guo, T. et al. (2023) ‘Efficient degradation of ciprofloxacin in water over copper-loaded biochar using an enhanced non-radical pathway. Molecules’, 28(24), p. 8094. doi: https://doi.org/10.3390/molecules28248094
Haneda, M. et al. (2001) ‘Surface characterization of alumina-supported catalysts prepared by sol–gel method. Part II.—Surface reactivity with CO’, Physical Chemistry Chemical Physics, 3(7), pp.1371-1375. doi: https://doi.org/10.1039/B009956M
Haque, S.M. et al. (2023) ‘Application of Box–Behnken design combined response surface methodology to optimize HPLC and spectrophotometric techniques for quantifying febuxostat in pharmaceutical formulations and spiked wastewater samples’. Microchemical Journal, 184, p. 108191. doi: https://doi.org/10.1016/j.microc.2022.108191
Hashemzadeh, B. et al. (2021) ‘Degradation of ciprofloxacin using hematite/MOF nanocomposite as a heterogeneous Fenton-like catalyst: A comparison of composite and core- shell structures’, Chemosphere, 281, p.130970. doi: https://doi.org/10.1016/j.chemosphere.2021.130970

Hassan, A.F. et al. (2025) ‘Synthesis of copper ferrite/hydroxyapatite nanoparticles composite based on cuttlebone for the adsorption and photocatalytic degradation of diazinon pesticide’, Arabian Journal for Science and Engineering, pp. 1-25. doi: https://doi.org/10.1007/s13369-025-10541-y
Horsth, D.F. et al. (2023) ‘Mixed oxides with corundum-type structure obtained from recycling can seals as paint pigments: color stability’, Beilstein Journal of Nanotechnology, 14(1), pp. 467-477. doi: https://doi.org/10.3762/bjnano.14.37
Hou, X. et al. (2019) ‘A novel 3D-structured flower-like bismuth tungstate/mag-graphene nanoplates composite with excellent visible-light photocatalytic activity for ciprofloxacin degradation’, Catalysis Communications, 121, pp. 27-31. doi: https://doi.org/10.1016/j.catcom.2018.12.006
Imam, S.S, Adnan, R. and Kaus, N.H.M. (2020) ‘Immobilization of BiOBr into cellulose acetate matrix as hybrid film photocatalyst for facile and multicycle degradation of ciprofloxacin’, Journal of Alloys and Compounds, 843, p. 155990. doi: https://doi.org/1016/j.jallcom.2020.155990
Imam, S.S, Adnan, R and Mohd Kaus, N.H. (2019) ‘Room-temperature in situ synthesis of BiOBr/Bi2O3 composites for the catalytic degradation of ciprofloxacin using indoor fluorescent light illumination’, SN Applied Sciences, 1(8), p. 845. doi: https://doi.org/10.1007/s42452-019-0851-3
Jalali, M.A, Mousavi, S.M. and Setoodehkhah, M. (2025) ‘Efficient removal of ciprofloxacin from pharmaceutical wastewater using advanced oxidation processes on doped perovskite La₀.₅A₀.₅CoO₃ (A= Sr, Ba and Ce) nanocatalysts’, Applied Catalysis O: Open, 199, p. 207024. doi: https://doi.org/10.1016/j.apcato.2024.207024
Jia, S. et al. (2025) ‘Regulation of sol-gel derived Cu-M/Al2O3 by metal additives for the selective catalytic transfer hydrogenation of furfural’, Catalysis Today, 445, p. 115078. doi: https://doi.org/10.1016/j.cattod.2024.115078
Jiang, S. et al. (2026) ‘Fe-Cu-loaded γ-Al2O3 as an efficient heterogeneous Fenton catalyst for the advanced treatment of petrochemical wastewater’, Water Cycle, 7, pp. 19-30. doi: https://doi.org/10.1016/j.watcyc.2025.06.006
Khatamian, M. et al. (2024) ‘Nitrate removal study of synthesized nano γ-alumina and magnetite-alumina nanocomposite adsorbents prepared by various methods and precursors’, Scientific Reports, 14(1), p. 7673. doi: https://doi.org/10.1038/s41598-024-58459-z
Kumar, A. et al. (2021) ‘Mechanistic insight into heterogeneous Fenton-like catalysis with M-Al2O3/SiO2 (M= Fe, Co and Ni) for acrylonitrile mineralization from real ABS resin wastewater: Optimization and toxicity assessment’, Journal of Environmental Chemical Engineering, 9(3), p. 105177. doi: https://doi.org/10.1016/j.jece.2021.105177
Li, X. et al. (2022) ‘The strong promoting effects of thin layer Al2O3 on FeCu Fenton-like components: Enhanced electron transfer’, Science of the Total Environment, 821, p. 153151. doi: https://doi.org/10.1016/j.scitotenv.2022.153151
Li, X. et al. (2023) ‘Novel impregnation–deposition method to synthesize a presulfided MoS2/Al2O3 catalyst and its application in hydrodesulfurization’, ACS Omega, 8(2), pp. 2596-2606. doi: https://doi.org/10.1021/acsomega.2c07123
Li, Y. et al. (2019) ‘Porous Fe2O3/Fe3O4@ Carbon octahedron arrayed on three-dimensional graphene foam for lithium-ion battery’, Composites Part B Engineering, 171, pp.130-137.doi: https://doi.org/10.1016/j.compositesb.2019.04.049
Liu, H. et al. (2022) ‘Adsorption and fenton-like degradation of ciprofloxacin using corncob biochar-based magnetic iron–copper bimetallic nanomaterial in aqueous solutions’, Nanomaterials, 12(4), p.579.doi: https://doi.org/10.3390/nano12040579
Luo, M.F. et al. (2005) ‘In situ XRD, Raman, and TPR studies of CuO/Al2O3 catalysts for CO oxidation’, Journal of Molecular Catalysis A: Chemical, 239(1-2), pp. 243-248. doi: https://doi.org/10.1016/j.molcata.2005.06.029
Madjene, F. et al. (2021)’Optimization of photocatalytic degradation of rhodamine B using Box–Behnken experimental design: Mineralization and mechanism’, Water Environment Research, 93(1), pp. 112-122. doi: https://doi.org/10.1002/wer.1360
Malakootian, M. et al. (2019) ‘Facile and green synthesis of ZnFe2O4@ CMC as a new magnetic nanophotocatalyst for ciprofloxacin degradation from aqueous media’, Process Safety and Environmental Protection, 129, pp. 138-151. doi: https://doi.org/10.1016/j.psep.2019.06.022
Mardwita, M. Yusmartini, E.S. and Wisudawati, N. (2019) ‘Effects of calcination temperatures on the catalytic activities of alumina supported cobalt and chromium catalysts’, Bulletin of Chemical Reaction Engineering & Catalysis, 14(3), pp. 654-659. doi: https://doi.org/10.9767/bcrec.14.3.4673.654-659
Mazurenko, J. et al. (2025) ‘Synthesis and characterization of copper ferrite nanoparticles for efficient photocatalytic degradation of organic dyes’, Journal of Nanotechnology, 2025(1), p. 8899491. doi: https://doi.org/10.1155/jnt/8899491
Moeini, T. and Meshkani, F. (2023) ‘Facile synthesis of M-CuFe2O4 (M= Al2O3, CeO2, La2O3, ZrO2, Mn2O3) catalysts using a one-pot method and their applications in high-temperature water gas shift reaction’, International Journal of Hydrogen Energy, 48(16), pp. 6370-6383. doi: https://doi.org/10.1016/j.ijhydene.2022.07.045
Mouna, C. Fatima, B. and Nassima, B. (2025) ‘Box–Behnken design for the optimization of fenton degradation of paracetamol in aqueous solution’, Journal of Water Chemistry and Technology, 47(6), pp. 573-585. doi: https://doi.org/10.3103/S1063455X25060074
Munnik, P. et al. (2015) ‘Recent developments in the synthesis of supported catalysts’, Chemical Reviews, 115(14), pp. 6687-6718. doi: https://doi.org/10.1021/cr500486u
Nascimento, R.C.D. et al. (2024) ‘A systematic review of heterogeneous catalysis applied to the treatment of pharmaceutical wastewater: operational conditions and statistical analysis’, Photochem, 4(3), pp. 285-301. doi: https://doi.org/10.3390/photochem4030017
Nikam, P.N. et al. (2024) ‘Synthesis and characterization of CuFe2O4 spinel ferrite for supercapacitor application’, Journal of the Indian Chemical Society, 101(10), p. 101277. doi: https://doi.org/10.1016/j.jics.2024.101277
Peng, Q. et al. (2025) ‘Prospects of advanced oxidation processes for high-salinity coking wastewater treatment: A strategy to support sustainable management’, Resources, Conservation and Recycling, 212, p. 107880. doi: https://doi.org/10.1016/j.resconrec.2024.107880
POOZESH, Z. et al. (2025) ‘Application of Box-Behnken design for optimizing the removal of penicillin g of phar-maceutical wastewater in the photocatalytic process with CoFe2O4@ 3DTiO2-doped porous graphene aerogel oriental‘, Journal of Chemistry, 41(2). doi: https://doi.org/10.13005/ojc/410203
Pratiwi, W.Z. et al. (2024) ‘Response surface optimization of ciprofloxacin degradation using UV/O3 oxidation process’, Results in Engineering, 24, p. 103299. doi: https://doi.org/10.1016/j.rineng.2024.103299
Ravi, G. and Thyagarajan, K. (2024) ‘CoFe₂O₄/NiFe₂O₄/CeO₂ nanocomposites: structural, FTIR, XPS, BET, and magnetic properties’, Applied Physics A, 130(10), p. 726. doi: https://doi.org/10.1007/s00339-024-07874-0
Rezaei, F. and Vione, D. (2018) ‘Effect of pH on zero valent iron performance in heterogeneous fenton and fenton-like processes: A review’, Molecules, 23(12), p. 3127. doi: https://doi.org/10.3390/molecules23123127
Salari, M. et al. (2021) ‘Optimal degradation of Ciprofloxacin in a heterogeneous Fenton-like process using (δ-FeOOH)/MWCNTs nanocomposite’, Environmental Technology & Innovation, 23, p. 101625. doi: https://doi.org/10.1016/j.eti.2021.101625
Sarrai, A.E. et al. (2016) ‘Using central composite experimental design to optimize the degradation of tylosin from aqueous solution by photo-fenton reaction’, Materials, 9(6), p.428. doi: https://doi.org/10.3390/ma9060428
Shaheen, K. et al. (2020) ’Synthesis, characterization, and multifunctional applications of Cu-Fe and Ni-Fe nanomaterials’, ACS Omega, 5(26), pp. 15992-16002. doi: https://doi.org/10.1021/acsomega.0c01259
Singh, P, Dhir, A. and Sangal, V.K. (2015) ‘Optimization of photocatalytic process parameters for the degradation of acrylonitrile using Box Behnken design’, Desalination and Water Treatment, 55(6), pp. 1501-1508. doi: https://doi.org/10.1080/19443994.2014.929032
Sumathirathne, L. and Euler, W.B. (2021) ‘Catalysis of the thermal decomposition of transition metal nitrate hydrates by poly (vinylidene difluoride)’, Polymers, 13(18), p. 3112. doi: https://doi.org/10.3390/polym13183112
Sun, S.P. et al. (2009) ‘Degradation of antibiotic ciprofloxacin hydrochloride by photo-Fenton oxidation process’, Environmental Engineering Science, 26(4), pp.753-759. doi: https://doi.org/10.1089/ees.2008.0076
Tiwari, A. et al. (2025) ‘Advancements in SnO2-based nanomaterials for efficient dye removal from wastewater’, Discover Sustainability, 6(1), p. 636. doi: https://doi.org/10.1007/s43621-025-01524-y
Vandevyvere, T. et al. (2023) ‘Impact of the incipient wetness impregnation sequence during the preparation of La or Ce promoted NiCu-Al2O3 on low-temperature hydrodeoxygenation’, Catalysis Communications, 181, p. 106734. doi: https://doi.org/10.1016/j.catcom.2023.106734
Wang, N. et al. (2025) ‘Study of Fe/Cu composite Fenton-like catalyst in the treatment of antibiotic wastewater: Preparation, application, degradation pathways and working mechanism’, Journal of Environmental Chemical Engineering, 13(2), p. 115926. doi: https://doi.org/10.1016/j.jece.2025.115926
Wang, X. et al. (2023) ‘Recent advances in H2O2-based advanced oxidation processes for removal of antibiotics from wastewater’, Chinese Chemical Letters, 34(3), p. 107621. doi: https://doi.org/10.1016/j.cclet.2022.06.044
Wang, X. et al. (2024) ‘Cu2(OH)3NO3/γ-Al2O3 catalyzes Fenton-like oxidation for the advanced treatment of effluent organic matter (EfOM) in fermentation pharmaceutical wastewater: The synergy of Cu2(OH)3NO3 and γ-Al2O3.’, Water Research, 261, p. 122049. doi: https://doi.org/10.1016/j.watres.2024.122049
Wu, Y.N. et al. (2014) ‘Magnetic metal–organic frameworks: γ‐Fe2O3@ MOFs via confined in situ pyrolysis method for drug delivery’, Small, 10(14), pp. 2927-2936. doi: https://doi.org/10.1002/smll.201400362
Zeng, Y.et al. (2023) ‘Catalytic degradation of ciprofloxacin in aqueous solution by peroxymonosulfate activated with a magnetic CuFe2O4@ biochar composite’, International Journal of Molecular Sciences, 24(6), p. 5702. doi: https://doi.org/10.3390/ijms24065702
Zhao, K.et al. (2018) ‘Reverse water gas shift reaction over CuFe/Al2O3 catalyst in solid oxide electrolysis cell’, Chemical Engineering Journal, 336, pp. 20-27. doi: https://doi.org/10.1016/j.cej.2017.11.028
Zumbar, T. et al. (2023) ‘Winning combination of Cu and Fe oxide clusters with an alumina support for low-temperature catalytic oxidation of volatile organic compounds’, ACS Applied Materials & Interfaces, 15(23), pp. 28747-28762. doi: https://doi.org/10.1021/acsami.3c02705