آمار
| تعداد نشریات | 23 |
| تعداد شمارهها | 368 |
| تعداد مقالات | 2,890 |
| تعداد مشاهده مقاله | 2,566,232 |
| تعداد دریافت فایل اصل مقاله | 1,821,892 |
Hydraulic influence of geometrical defects in Venturi flumes: shall we destroy and rebuild? | ||
| Journal of Applied Research in Water and Wastewater | ||
| مقاله 8، دوره 1، شماره 1، خرداد 2014، صفحه 35-39 اصل مقاله (919.45 K) | ||
| نوع مقاله: Research Paper | ||
| نویسندگان | ||
| Matthieu Dufresne* 1؛ Jose Vazquez2 | ||
| 1National School for Water and Environmental Engineering of Strasbourg (ENGEES) – ICube (University of Strasbourg, CNRS, INSA of Strasbourg, ENGEES), Mechanics Department, Fluid Mechanics Team ENGEES, 1 Quai Koch BP 61039 67070 Strasbourg cedex France. | ||
| 2National School for Water and Environmental Engineering of Strasbourg (ENGEES) | ||
| چکیده | ||
| Venturi flumes are measurement structures commonly used in water systems to measure the flow discharge. Some of them are not well installed or present some geometrical defects. The objective of this study is to investigate the hydraulic influence of a number of typical wrong installations and geometrical defects of long-throated Venturi flumes: significant positive or adverse slopes, humps and hollows on the walls of the throat, hump or hollow on the bed of the throat. The geometric tolerances corresponding to an acceptable tolerance on the discharge of 2% and 5% are calculated for each defect. A number of corrections of the head –discharge relationship are proposed to avoid the destruction of a flume if the geometric tolerance is not respected. | ||
| کلیدواژهها | ||
| Discharge؛ Venturi flume؛ Defect؛ Tolerance | ||
| مراجع | ||
|
Bos M.G., The use of long-throated flumes to measure flows in irrigation and drainage canals, Agricultural Water Management 1 (1977) 111-126. Dabrowski W., Polak U., Improvements in flow rate measurement by flumes, Journal of Hydraulic Engineering 138 (2012) 757-763. Dufresne M., Vazquez J., Head–discharge relationship of Venturi flumes: from long to short throats, Journal of Hydraulic Research 51 (2013) 465-468. ERCOFTAC, Special interest group on "quality and trust in industrial CFD" – Best practice guidelines, European Research Community On Flow, Turbulence and Combustion, (2000). Hager W.H., Wastewater hydraulics–Theory and Practice, Springer, (1999). ISO, Liquid flow measurement in open channels – Rectangular, trapezoidal and U-shaped flumes, International Standardization Organization, ISO 4359:2012, (2012). Open FOAM, Open FOAM – The open source CFD toolbox – User guide, Open FOAM Foundation (2013). Roache P.J., Perspective: a method for uniform reporting of grid refinement studies, Journal of Fluids Engineering 116 (1994) 405-413. Yeung H., An examination of BS3680 4C (ISO/DIS 4369) on the measurement of liquid flow in open channels-flumes, Flow Measurement and Instrumentation 18 (2007) 175-182. | ||
|
آمار تعداد مشاهده مقاله: 3,688 تعداد دریافت فایل اصل مقاله: 3,984 |
||