Developing turbulent flows in rectangular channels: A parametric study

Akoz M.S., Kirkgoz M.S., Oner A.A., Experimental and numerical
modeling of a sluice gate flow. Journal of Hydraulic Research 47(2)
(2009) 167-176.
Bonakdari H., Modélisation des écoulements en collecteur
d’assainissement – Application à la conception de points de
mesures. Thesis (PhD), University of Caen, France, 2006.
Bonakdari H., Zinatizadeh A.A.L., Determination of Doppler flow
meters position in sewers using computational fluid dynamics, Flow
Measurement and Instrumentation 22 (2011) 225-234.
Bonakdari H., Effects of 3D structured grids on computational
modeling of flow. LAP LAMBERT Academic Publishing,
Saarbrücken, Germany, 2012.
Cebeci T., Analysis of turbulent flows. ELSEVIER Ltd, Oxford, U.K.
2004.
Cardoso A.H., Graf W.H., Gust G., Uniform flow in a smooth open
channel, Journal of Hydraulic Research 27(5) (1989) 603-616.
Dean R., Reynolds number dependence of skin friction and other bulk flow variables in two-dimensional rectangular duct flow. Journal of Fluids Engineering 100 (1978) 215-223.
Dean R., Reynolds number dependence of skin friction and other bulk flow variables in two-dimensional rectangular duct flow. Journal of Fluids Engineering 100 (1978) 215-223.
Demuren A.O., Rodi W., Calculation of turbulence-driven secondary motion in non-circular ducts. Jounal of Fluid Mechanics 140 (1984) 189-222.
Graf W.H., Turbulent characteristics in rough uniform open channel flow. Annual Report, Lausanne, Switzerland, 1991.
Grass A.L., Structural features of turbulent flow over smooth and rough boundaries, Journal of Fluid Mechanics 50 (1971) 233-255.
Hinze J.O., Turbulence. McGraw-Hill Book Company, Second edition, New York, US, 1975.
Hirt C.W., Nicholas B.D., Volume of fluid (VOF) method for dynamics of free boundaries, Journal of Computational Physics 39 (1981) 201-225.
Kirkgoz S., Ardichoglu M., Velocity profiles of developping and developed open channel flow, Journal of Hydraulic Engineering 115 (1997) 1099-1105.
Launder B.E., Spalding D.B., The numerical computation of turbulent flows, Computer Methods in Applied Mechanics and Engineering 3 (1974) 269-89.
Lien K., Monty J.P., Chong M.S., Ooi A., The entrance length for fully developed turbulent channel flow. 15th Australasian Fluid Mechanics Conference, Ausralia 2004.
Nezu I., Rodi W., Experimental study on secondary currents in open channel flow. 2lst IAHR congress, Melbourne, Australia, 2 (1985) l9-23.
Nezu I., Nakagawa H., Turbulence in open-channel flows. IAHR-Monograph, A. A. Balkema Publishers, Rotterdam, The Netherlands, 1993.
Nikuradse J., Laws of flow in rough pipes. NACA Technical Notes, No. 1295, Washington D. C., US. 1933.
Perkins H.J., The formation of streamwise vorticity in turbulent duct flow. Journal of Fluid Mechanics 44 (1970) 721-740.
Ranga Raju K.G., Asawa G.L., Mishra H.K., Flow establishment length in rectangular channels and duct. Journal of Hydraulic Engineering 126(7) (2000) 533-539.
Stearns E.P., A reason why the maximum velocity of water flowing in open channels is below the surface, Transactions of the American Society of Civil Engineers 7 (1883) 331-338.
Stovin V.R., Grim J.P., Buxton A.P., Tait S.J., Parametric studies on CFD models of sewerage structures. 9th International Conference on Urban Drainage, Portland, US, 2002.
Tominaga A., Nezu I., Ezaki K., Nakagawa H., Three dimensional turbulent structure in straight open channel flows, Journal of Hydraulic Research 27 (1989) 149-173.
Wang J.S., Tullis J.P., Turbulent flow in the entry region of a rough pipe. Journal of Fluids Engineering 96 (1974) 62-68.
Zanoun E.S., Durst F., Nagib H., Evaluating the law of the wall in two- dimensional fully developed turbulent channel flows, Physics of Fluids 15 (2003) 3079–3089.