آمار
| تعداد نشریات | 23 |
| تعداد شمارهها | 368 |
| تعداد مقالات | 2,890 |
| تعداد مشاهده مقاله | 2,566,188 |
| تعداد دریافت فایل اصل مقاله | 1,821,854 |
Head-discharge relationship of flumes: Energy loss versus boundary layer | ||
| Journal of Applied Research in Water and Wastewater | ||
| مقاله 2، دوره 1، شماره 2، شهریور 2014، صفحه 57-60 اصل مقاله (710.98 K) | ||
| نوع مقاله: Research Paper | ||
| نویسندگان | ||
| Matthieu Dufresne* ؛ José Vazquez | ||
| 1National School for Water and Environmental Engineering of Strasbourg (ENGEES), 1 quai Koch BP 61039 67070 Strasbourg cedex France. 2ICube (University of Strasbourg, CNRS, INSA of Strasbourg, ENGEES), Mechanics Department, Fluid Mechanics Team. | ||
| چکیده | ||
| Long-throated flumes are measurement structures often used in water and wastewater systems to determine the flow discharge. The head-discharge relationship of long-throated flumes is traditionally determined following the critical flow theory and the boundary layer concept. After a review of the traditional approach and an analysis of the approximate assumptions of the boundary layer approach, this study revisits the energy loss approach as an alternative to the questionable boundary layer concept for the determination of the discharge in long-throated flumes. Computational fluid dynamics (CFD) is used for determining the kinetic energy correction coefficient and the piezometric energy correction coefficient along the throat of the flume (especially in the critical section); CFD is also used for locating the critical section and determining the energy loss between the measurement section and the critical section. A new method based on the kinetic energy correction coefficient, the piezometric energy correction coefficient and the energy loss between the measurement section and the control section is proposed. A step-by-step procedure is given for the head-discharge calculation. It appears that the proposed alternative is a simple and promising method to accurately determine the discharge coefficient. | ||
| کلیدواژهها | ||
| Venturi flume؛ Boundary layer؛ Energy loss | ||
| اصل مقاله | ||
|
Matthieu Dufresne, José Vazquez | ||
| مراجع | ||
|
Ackers P., White W.R., Perkins J.A., Harrison, A.J.M., Weirs and flumes for flow measurement, Wiley, New-York, (1978). ANSYS, FLUENT user’s guide, ANSYS Ltd, (2000). Bos M.G., The use of long-throated flumes to measure flows in irrigation and drainage canals, Agricultural Water Management 1 (1977) 111-126. Castro-Orgaz O., Chanson H., Bernoulli theorem, minimum specific energy, and water wave celerity in open-channel flow, Journal of Irrigation and Drainage Engineering 135(6) (2009) 773-778. Clemmens A.J., Wahl T.L., Bos M.G., Replogle J.A., Water measurement with flumes and weirs, International Institute for Land Reclamation and Improvement, Wageningen, The Netherlands, (2001). Dabrowski W., Polak U., Improvements in flow rate measurement by flumes, Journal of Hydraulic Engineering 138(8) (2012) 757-763. Hager W.H., Critical flow condition in open-channel hydraulics, Acta Mechanica 54 (1985) 157-179. Hager W.H., Wastewater hydraulics – Theory and practice, Springer, (1999). Harrison A.J.M., Boundary layer displacement thickness on flat plates, Journal of the Hydraulics Division 93(HY4) (1967) 79-91. Jaeger C., Engineering fluids mechanics, Blackie and Son, (1956). ISO, Liquid flow measurement in open channels – Rectangular, trapezoidal and U-shaped flumes, International Standardization Organization, ISO 4359:2012, (2012). Roache P.J., Perspective: a method for uniform reporting of grid refinement studies, Journal of Fluids Engineering 116 (1994) 405-413. Yeung H., An examination of BS3680 4C (ISO/DIS 4369) on the measurement of liquid flow in open channels-flumes, Flow Measurement and Instrumentation 18 (2007) 175-182. | ||
|
آمار تعداد مشاهده مقاله: 5,517 تعداد دریافت فایل اصل مقاله: 4,706 |
||